Author Topic: Salisbury axle  (Read 232 times)

Offline gregb

  • 4 Rivet member
  • ****
  • Posts: 251
Salisbury axle
« on: November 19, 2018, 06:38:38 PM »

Looking for a series 3 Salisbury rear axle.

Greg

Offline lilmul

  • M.O.R.E.
  • 5 rivet member
  • *
  • Posts: 1582
  • my new project
Re: Salisbury axle
« Reply #1 on: April 07, 2019, 03:55:09 AM »
Do you need parts for your rear axle or the complete assembly

Tony
Just a retired soldier fixing his toys
They dont call me speed wrench for nothing

Offline gregb

  • 4 Rivet member
  • ****
  • Posts: 251
Re: Salisbury axle
« Reply #2 on: April 08, 2019, 09:36:15 AM »
Tony

I was looking for the complete assembly.

Greg

Offline lilmul

  • M.O.R.E.
  • 5 rivet member
  • *
  • Posts: 1582
  • my new project
Re: Salisbury axle
« Reply #3 on: May 29, 2019, 11:57:31 AM »
Hi there

You may have to go to eBay or some place like that to get a complete assembly.

I have yellow in my shop right now and itís salisbury Iíd pretty much dead.

All the side gears and spider gears are worn out and it took me a week to find the parts in the UK .

The parts are getting very hard to find now . I have 4 Salisburyís in my storage shed and they are all from 110,s I even have a front salisbury.

Unfortunately they can be swapped over to a series with some work BUT they are 4 inches wider than a series truck and the axle ration is 3.54 your series will have 4.71 . The gear ration can be changed but it will cost a fortune to get the 4.71 gear set.

My best advise is to try eBay  I hope this helps

Tony

Just a retired soldier fixing his toys
They dont call me speed wrench for nothing

Offline gregb

  • 4 Rivet member
  • ****
  • Posts: 251
Re: Salisbury axle
« Reply #4 on: May 31, 2019, 12:37:07 PM »
Tony,

Thanks for the reply, I knew it would be a long shot to find a series salisbury, looking for a stronger axle option for the 88 Will is building.

Greg