quick parts order

[lilmul]

Hi everyone .

I have been getting quit a few PM,s about axle seals and head gasket sets and so on.

It seems there alot of people that need some small parts.If there is enough interest ill put in a part order to the UK and have it flown over.The club here is now getting a very very good deal from FedEx to have our parts flown over.


Let me know and ill get things in order and order the parts.

Dont worry it wont take 6 months to get the parts     im doing the parts ordering and am not stuck in the stone age unlike some persons we know 

[carib]

Tony:

I would be in 4 rear axle seals and 4 front axle seals. The ones that prevent oil from getting on the brake shoes. Any idea of price for such an order.

Kenneth

[carib]

Also:

Series engine mounts I need 8 for my Generator project Any idea on costs.

Kenneth

[SlowRVR]

Tony what sort of shipping rates?

[lilmul]

Ill get back to you on the shipping ratand is better than a member good get when he worked for FedEx.


I will be placing the order next sunday night.This will give you guys time to see what you need for parts.Keep in mind the heaver the parts the more it will cost.Giving you guys a week will also give me time to get you the prices for the parts.


We have ONE week and then ill be ordering.The cut off for ordering parts will be next SATERDAY night.

Send me the list of what you need.

[ACP30470]

Tony. May as well order me a set of locking hubs for my lightweight as well as a set of defender window studs that join it to the lower door.

[moses]

Tony, I usually order my parts direct from Paddocks, or from the Rovahfarm (www.rovahfarm.com) as he's local and better than some with his prices.

I'm thinking I'll be changing out my clutch while I have the transmission off. Is it worth getting through you, or am I just going to get hit twice for postage and import duty? 

[lilmul]

OK quick up date.

The cost of ordering nd getting it flown over is as follows


It @4 times the weight.

So a 15kg box will cost around $60.00 to have flown over.I think thats pretty good if you ask me.The price also depents on the size of the box.


BenP ill provide you with the parts you need to do your front end.I dont have a used set of calipers here for you .We could have them flown over if you wish.If we order the Cv joints and Swivel balls it will cost a fair bit.Ill just make sure i order them on the next big parts order.

Axle seals and gaskets dont cost a whole lot to get shipped.

A clutch may costy a bit.

I do have a new clutch here if its needed ?Ill need to know if its for a series 2 or 3.

ok i guess thats it for now.

[pickuprover]

Timing chain and tensioner and any other part that should be replaced while replacing a timing chain that skipped a tooth?

[lilmul]

Ill have a look at the parts book on the timing chain issue.

We have to remember about BIG objects.It will cost more to have then shipped.There will also be no insurance on Body Parts and Glass.

[lilmul]

Moses i need to know what type of clutch you need .Is it a series 2A or 3?  we get our parts @30% cheaper than paddocks and anyone else does.

Bringing the doors over wont be a problem as long as you know there is no insurance on them and you are willing to pay the shipping .I would be waiting for the next slow boat to come over.


Ill post the parts costs shortly

[lilmul]

Hi everyone here are some of the prices for your parts.I hope you all dont mind but ill be posting them here so everyone can see what we pay for the parts so they have a better idea of what they can expect.Ben P ill have yoor total shortly when i get the info about your truck from you .

All of the prices are using a 2.03 conversion factor because the doller is up and down.The totals could be less if the dollar is down.I have also added the 13%HST to the totals.

Pick up rover
1.Tensioner 2.25 petrol      90515323         16.24
2.Timing chain         504375         3.02
3.Idler sprocket         236067         2.58
4.Crank sprocket         268333         5.74
5.Timing chain rub block      275234         0.72
6.Cam sprocket         568474         4.69
7.Crank seal         ERC7987         0.62
8.Timing cover gasket                      538039         0.21
9.Block inlet gasket                      538038         0.07
10.Water pump gasket                      538671         0.09
11.By pass hose         574871         0.47
12.Water pump         STC3758         9.80
Total less shipping      $101.51

Keneth
1. Hub seals x8         RTC3511         0.44=3.52
2. composite head gasket                    ERC6380         2.13
3. 8 engine mounts         NRC2054         0.77=6.16
Total less shipping      $27.09

Chad
1.  2 x U joints for range rover      RRC   FrontRTC4587,RearRTC4587         3.46=6.92
2.Rear diff seal                                           FRC8220         0.63
3.Rear corners for RRC    Right RTC6203     101.92          Left RTC6204  83.43
Total less shipping       $442.50

Ben P
1.Axle seals 90
2.Swivels balls x2
3.CV joints x2
4.swivel seals x2
5.Front calipers x2
6.Swivel ball gaskets x2
Total less shipping


Moses
1.Series 3 clutch pressure plate      576557      21.73
2.series 3 clutch disc         FRC2297      12.32
3.series 3 throw out bearing      FRC4679      4.48
4.series 3 Plastic retaining clip x2                   576203      0.10
Total less shipping        $88.61

[jimh]

Tony, Can I get a quote on two series  lower door repair sections, paddocks # 2006A .   jim

[moses]

Sorry, I've been out most of the weekend, and got called away before I could reply this morning.

Yes, it is a SIII clutch I need, and that's a good price.  I'll have a look around at what I have here, and what I think I'll need for this Summer's repair jobs and get back to you with a full list ASAP.

Thanks,

Neil.

[carib]

Tony:

Looks Good. Steve will pick up composite Head Gasket (you have in stock)from you for me so I do not need to Order one in the order.

Can you kindly give me a upper limit on what shipping would be.

Kenneth